Sales Inquiry
Spreacol 500 Back
Spreacol 500 is a powder urea formaldehyde resin, which must be dissolved water prior to use. When used with the hardener, it provides an excellent adhesive for any kind of wood gluing.


Parameter Value Unit


White free flowing powder


pH (1:1) at 20 0C

8.0 – 9.0

pH units


1.5 max


Free formaldehyde

1 – 2


Gel time (1:1) at 1000

Using 3 % NH4CL (20%)

80 max


Viscosity (2:1) at 200C

4000 max


Type Quantity

Spreacol 500

100 Parts by weight.


100 Parts by weight.


25 Parts by weight.

** Hardener

2.5 Parts by weight.


Dissolving the resin:
  1. Take all water*** in the mixer****.
  2. Add required amount of spreacol 500 and mix until a homogenous solution is obtained.
  3. Other additives and hardener are added.

*Flour is added in case of gluing veneer to plywood.

**The hardener quantity depends on pressing conditions like temperature, timing ,pressure and thickness.

***Water temperature should be 20 – 30 0C because with lower temperature mixing is more time consuming.

****A mechanical stirrer may be used for this purpose.With high speed mixer all the water may be placed first and then resin may beadded, while mixer is running,With low speed mixer, it is better to make a homogenous mix of the resin with,about 2/ 3 of water, and rest of the water may be added later.


  • Very good adhesives for wooden materials
  • Wide variety of end uses such as wood-based panels, furniture, load – bearing constructions and wooden building products.


  • 25 Kgs.nett laminated polyethylene bags. 


  • Like any formaldehyde product, Spreacol 500 contains free . formaldehyde. This may cause dermatitis, when it comes into contactwith skin of sensitive persons. Skin contact with powder should be avoided. Hands should be thoroughly washed with soap and hot water at the end of the working day and before meals. A dust mask should be worn, while emptying the bags.


  • TThe powder should be stored in the original bags in a cool place protected from heat. Care should be taken that powder doesn't absorb moisture and water. The bags which have been opened should be carefully closed before storage. When stored in original bags at 200C, shelf life would not be less than one year.