Products Urea formaldehyde powder resin MIX

Urea formaldehyde powder resin MIX

Spreacol 500 MIX is a powder of urea formaldehyde resin mixed with the hardener. It must be dissolved in water prior to use. It provides an excellent adhesive for any kind of wood gluing.

Parameter pH (1:1) at 20 0C Humidity Free formaldehyde Gel time (1:1) at 1000C Viscosity (2:1) at 200C
Value 4.5 – 5.5 1.5 max 1 – 2 60 max 4000 max
Unit pH units % % sec cps
Appearance White free flowing powder

Type

Quantity

Spreacol 500 MIX

100 Parts by weight.

Water

100 Parts by weight.

*Flour

25 Parts by weight.

 

Dissolving the resin:-

  1. Take all water** in the mixer***.
  2. Add the required amount of spreacol 500 MIX and mix until a homogenous solution is obtained.
  3. Other additives are added.

---------------------------------------------------------------

  • Flour is added in case of gluing veneer to plywood.
  • Water temperature should be 20 – 30 0C because with lower temperatures mixing is more time-consuming.
  • A mechanical stirrer may be used for this purpose. With a high-speed mixer, all the water may be placed first and then resin may be added, while the mixer is running. With a low-speed mixer, it is better to make a homogenous mix of the resin with about 2/ 3 of water, and the rest of the water may be added later.

  • Very good adhesives for wooden materials.
  • Wide variety of end uses such as wood-based panels, furniture, load – bearing constructions, and wooden building products.

Packing:  • 25 kg .nett laminated polyethylene bags.

                                                                        

Handling: Like any formaldehyde product, Spreacol 500  MIX contains free formaldehyde. This may cause dermatitis when it comes into contact with the skin of sensitive persons. Skin contact with powder should be avoided. Hands should be thoroughly washed with soap and hot water at the end of the working day and before meals. A dust mask should be worn while emptying the bags.          

 

Storage: The powder should be stored in the original bags in a cool place protected from heat. Care should be taken that powder doesn't absorb moisture and water. The bags which have been opened should be carefully closed before storage. When stored in original bags at 200C, the shelf life would not be less than 4 months.

Prev
Next

We are not just the manufacturer
But we are also the experts